CephFix

Downs Cephalometric Analysis: Landmarks, Measurements and Norms

· 9 min read

The Downs analysis is one of the classic cephalometric methods. William B. Downs described it in 1948 in his paper “Variations in facial relationships: their significance in treatment and prognosis” and later expanded it in his work on the analysis of the dentofacial profile (1956). Several measurements that are now part of other analyses — the facial angle, the angle of convexity, the Y-axis — were first brought together into one system by Downs. This article covers the landmarks and planes of the analysis, its ten measurements, their norms, and why these norms cannot be applied to every patient without adjustment.

The basis of the analysis: the Frankfort horizontal

Downs relates almost all measurements to the Frankfort horizontal (FH), the line from porion (Po, the top of the external auditory meatus) to orbitale (Or, the lowest point of the orbital margin). This distinguishes it from the Steiner analysis, which uses the S–N line as its reference. The second key element is the facial plane N–Pog: the line from nasion (N, the most anterior point of the frontonasal suture) to pogonion (Pog, the most anterior point of the chin).

The measurements fall into two groups of five: skeletal measurements describe the position of the jaws and the direction of growth, and dental measurements describe the position of the incisors and the occlusal plane relative to the skeleton.

Landmarks and lines

In current studies using the Downs analysis, the mandibular plane is usually drawn through gonion and menton (as, for example, in Puspitasari and Siregar, 2024). Because different schools construct this plane in different ways, it is useful to state in the report which construction was used.

Skeletal measurements

Facial angle

The angle between the Frankfort horizontal and the facial plane N–Pog. It shows the anteroposterior position of the chin: the smaller the angle, the further back the chin lies relative to FH; the larger, the more prominent it is.

Angle of convexity

The angle between the lines N–A and A–Pog. It describes the convexity of the skeletal profile: positive values mean that point A lies in front of the facial plane (a convex profile), negative values indicate a concave profile. The Downs mean is 0°.

A-B plane to facial plane

The angle between the A–B line and the facial plane N–Pog. It reflects the relationship of the apical bases of the two jaws relative to the profile. The normal value is negative: point B lies behind point A.

Mandibular plane angle

The angle between the mandibular plane and FH. High values are associated with a vertical growth pattern, low values with a horizontal one.

Y-axis

The angle between the S–Gn line and the Frankfort horizontal. It describes the direction of chin growth: as the angle increases, the chin moves downward and backward; as it decreases, the chin grows more forward.

Dental measurements

Cant of the occlusal plane

The angle between the occlusal plane and FH. A steeper occlusal plane usually accompanies a vertical facial pattern.

Interincisal angle

The angle between the long axes of the upper and lower central incisors. The smaller the angle, the more the incisors are tipped forward (proclined).

Lower incisor to occlusal plane

The angle between the long axis of the lower incisor and the occlusal plane. Downs recorded it as a deviation from a right angle, so the norm is a small number (14.5°) rather than an angle of about 104°.

Lower incisor to mandibular plane

The angle between the lower incisor axis and the mandibular plane, also recorded as a deviation from 90°. The norm of 1.4° corresponds to the familiar IMPA notation of about 91.4°. A larger value means more proclined lower incisors.

Upper incisor to the A–Pog line

The distance in millimetres from the incisal edge of the upper central incisor to the A–Pog line. The greater the distance, the more protrusive the upper incisors.

Downs analysis norms

Downs derived his norms from a small sample: 20 white Americans (N = 20 according to Rizvi, 2024). The table shows the means and ranges that recent studies cite from Downs (1948); standard deviations differ between some secondary sources, so they are not given here.

MeasurementMeanRange (min — max)
Facial angle (FH — N–Pog)87.8°82° — 95°
Angle of convexity (N–A–Pog)0°−8.5° — +10°
A–B plane to N–Pog−4.6°−9° — 0°
Mandibular plane angle (to FH)21.9°17° — 28°
Y-axis (S–Gn to FH)59.4°53° — 66°
Cant of occlusal plane (to FH)9.3°1.5° — 14°
Interincisal angle135.4°130° — 150.5°
Lower incisor to occlusal plane (deviation from 90°)14.5°3.5° — 20°
Lower incisor to mandibular plane (deviation from 90°)1.4°−8.5° — 7°
Upper incisor to A–Pog2.7 mm−1 — 5 mm

Source of the values: Downs (1948) as reproduced by Rizvi (2024) and Puspitasari and Siregar (2024); the means in both papers agree.

Why Downs norms cannot be applied to everyone

The Downs norms were obtained from a small sample of white Americans in the mid-20th century. Studies of other groups show clear differences, especially in incisor position.

MeasurementDowns (1948)Bangladesh, adults 19–27 years, men / women (Rizvi, 2024)Indonesia, Jakarta, n = 29 (Puspitasari, Siregar, 2024)
Facial angle87.8°84.45° / 86.99°85.17°
Angle of convexity0°0.23° / 3.19°3.62°
Mandibular plane angle21.9°23.88° / 23.28°29.82°
Y-axis59.4°63.08° / 60.70°64.15°
Interincisal angle135.4°120.01° / 118.19°113.06°
Lower incisor to mandibular plane1.4°10.75° / 10.60°10.24°
Upper incisor to A–Pog2.7 mm8.34 / 8.32 mm8.14 mm

In Rizvi's sample (91 people with well-balanced faces), the dental measurements differed significantly from the Downs norms in every parameter, and the author concludes that a single standard of facial aesthetics should not be applied to all ethnic groups. The Jakarta sample also shows more pronounced incisor protrusion and a larger mandibular plane angle. A value “outside the Downs norm” therefore does not by itself indicate pathology: it should be compared with norms obtained for the patient’s own group and age and assessed together with the clinical picture.

How to read the result

Where errors are most common

The Downs analysis combines well with other methods: for example, with the Steiner analysis, where the same jaws are assessed relative to S–N, or with the McNamara analysis, which relies more on linear measurements.

Sources

  1. Downs W. B. Variations in facial relationships: their significance in treatment and prognosis. American Journal of Orthodontics. 1948;34(10):812–840. Publication record
  2. Downs W. B. Analysis of the dentofacial profile. The Angle Orthodontist. 1956;26(4):191–212. Article page
  3. Rizvi H. M. Cephalometric study of the dentofacial complex of Bangladeshis according to Downs analysis. Journal of Bangladesh College of Physicians and Surgeons. 2024;42(2):149–154. doi:10.3329/jbcps.v42i2.72357. Article
  4. Puspitasari A. L., Siregar F. Evaluation of cephalometric Downs analysis on cephalograms at RSGM YARSI, Jakarta. Yarsi Dental Journal. 2024;1(2):59–66. Article

In CephFix, the Downs analysis is calculated automatically from the landmarks the clinician places on the radiograph, together with the other eight analyses. Each value is shown next to its norm, and the norms can be selected by the patient’s type, age and sex. The final interpretation and diagnosis are always made by the clinician.